Accessories

32 Results

per page
  • Vortex Torque Wrench Mounting Kit

    VT-CTW

    This tool is easy to operate, simple to set, and offers fast, accurate tension wherever and whenever you need it. The easy to read inch-pound increments ensure you tighten in 1in/lb increments to the specified torque, and not a bit more, ranging from 10 in/lbs to 50 in/lbs.

    CA$99.00
  • Lo Pro Bubblevel for 34mm Riflescope Tube

    VT-LBL-34

    This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture.

    Mounts quickly and easily to the riflescope tube.

    Made in USA

  • Lo Pro Bubblevel for 30mm Riflescope Tube

    VT-LBL-30

    This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture.

    Mounts quickly and easily to the riflescope tube.

    Made in USA

  • Lo Pro Bubblevel for 1-Inch Riflescope Tube

    VT-LBL-1

    This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture.

    Mounts quickly and easily to the riflescope tube.

    Made in USA

  • Vortex Bubble Level for 35mm Riflescope Tube

    VT-BL35

    For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

    Mounts quickly and easily to the riflescope tube.

  • Vortex Bubble Level for 34mm Riflescope Tube

    VT-BL34

    For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

    Mounts quickly and easily to the riflescope tube.

  • Vortex Bubble Level for 30mm Riflescope Tube

    VT-BL30

    For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

    Mounts quickly and easily to the riflescope tube.

  • Vortex Bubble Level for 1-inch Riflescope Tube

    VT-BL-1

    For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

    Mounts quickly and easily to the riflescope tube.

  • Vortex Switchview Throw Lever 2 (1.739:/44mm)

    VT-SV-2

    Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-2 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-2 is one tough accessory that will serve you well.

  • Vortex Switchview Throw Lever 3 (1.930"/49mm)

    VT-SV-3

    Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-3 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-3 is one tough accessory that will serve you well.

  • Vortex Switchview Throw Lever 4 (1.72"/44mm)

    VT-SV-4

    Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-4 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-4 is one tough accessory that will serve you well.

  • Vortex Switchview Throw Lever 5 for PST Gen II

    VT-SV-5

    Maximize the efficiency of magnification transitions with fluid precision using our throw lever. Constructed of skeletonized, lightweight, tough, hard-coat anodized machined aluminum.

    Compatible with all configurations of Viper PST Gen II riflescopes.

To top